[lr172]

I will be mounting Dynon servos for pitch and roll in my 6A. I will be mounting the roll servo in the fuse.

I will be making my own brackets, similar to those sold by Tru-Trak and Dynon. Can someone tell me the thickness of your servo mounting brackets. I initially guessed .063, but thought they might be .040.

Thanks for the assistance.

Larry

 

[Jesse]

I don't have one in hand to check, but I'm fairly certain they are 0.063".

 

[lr172]

I don't have one in hand to check, but I'm fairly certain they are 0.063".

Thanks Jesse. I have never bent .063 before. I don't have a brake, so bend by hand with radius'ed jigs. Will I be able to bend the .063 by hand?

Larry

 

[wirejock]

AP

My Dynon AP bracket measures .055" with the powder coat.