My GRT Sport HS PFD stopped working shortly after takeoff. First the bottom of the PFD turned black, then the entire display had lots of horizontal lines first white then yellow. Powered off and back on, no change. Diverted to nearby airport. While in route turned on vent fan since glareshield felt hot and a few minutes later the display came back on but seemed stuck showing horizon banked. Perhaps that was because the airplane was banked when I powered it back on. After landing, display seemed normal during landing and taxi.
I'm thinking it might be too hot. Anyone got ideas or suggestions?
Thanks
Jim Butcher
I'm thinking it might be too hot. Anyone got ideas or suggestions?
Thanks
Jim Butcher