RVG8tor Well Known Member Feb 8, 2012 #1 Is there a special type of anti-seize reccomended for the threaded part of the CHT probe. Thanks.
Walt Well Known Member Feb 8, 2012 #2 Anti-seize not really needed here, these only get snugged in and are not a torqued fastener. Don't over tighten them.
Anti-seize not really needed here, these only get snugged in and are not a torqued fastener. Don't over tighten them.
A aerhed Well Known Member Feb 8, 2012 #3 Try loctite 767. Keeps the brass from sticking in the aluminium.