[Greenley]

I could make my own but wondering if anyone know who sells these tight fit riveting tools?

http://www.dogaviation.com/2013/11/an-old-tool-revisited-snap-bushing-mod.html

 

[SMO]

Avery

You can get one from Avery

http://www.averytools.com/prodinfo.asp?number=P26A

 

[Greenley]

I linked to the picture:

 

[Ron RV8]

I cut a simple wedge out of 1/2 x 1/2 aluminum bar stock and drilled a hole in it. Super simple and worked like a charm. Only trouble is that they're easy to lose if you don't watch em when the rivet pops so make a few at a time...

 

[BillL]

I cut a simple wedge out of 1/2 x 1/2 aluminum bar stock and drilled a hole in it. Super simple and worked like a charm. Only trouble is that they're easy to lose if you don't watch em when the rivet pops so make a few at a time...

+1 - hand made are smaller too and leave more head room for the tool. I love tools, but the hand made served me better, not just cheaper.