BGS
Well Known Member
So I started to work on finishing up the interior components of my rv10 and got to getting the handle portion of the fuel valve fit. It just so happens that I must have put the valve in backwards (180 degrees off).
Since the valve extension will only go one way, you cannot just turn the handle around.
Anybody have any ideas on how to fix this without removing the valve and fabricating a new bracket. Do not really want to do this as the bracket is no big deal, but then non of my fuel lines will work and have to order new ones.j
Any help appreciated greatly.
Thanks
Brian
Since the valve extension will only go one way, you cannot just turn the handle around.
Anybody have any ideas on how to fix this without removing the valve and fabricating a new bracket. Do not really want to do this as the bracket is no big deal, but then non of my fuel lines will work and have to order new ones.j
Any help appreciated greatly.
Thanks
Brian
