Smilin' Jack
Well Known Member
I have mounting the battery box and master and started relays and figured I had better look at the EMS 220 wiring and see i need to install the ammeter shunt.
With the P 680 battery installed and the relays installed as per Vans diagram, where and what terminals do I mount the shunt to if my desire is to use the suggested A mounting as shown on the Dynon EMS?
No a wiring expert by any means.
Thanks,
Smilin' Jack
With the P 680 battery installed and the relays installed as per Vans diagram, where and what terminals do I mount the shunt to if my desire is to use the suggested A mounting as shown on the Dynon EMS?
No a wiring expert by any means.
Thanks,
Smilin' Jack
Last edited: