[RV_7A]

Does anyone know who carries a spun aluminum spinner that has a gold type of anodizing on it. I've seen these on planes at Sun-N-Fun but don't know who manufatures them.

-Jeff

 

[Mel]

George Orndorff carries a polished spun aluminum spinner. I don't know if he has any gold anodized ones. Call him at 940-648-0841
Mel...DAR

 

[Bob Martin]

SensenichDirect Spinners

What You Get:

Manufactured From 6061 T6 Aluminum

Finished Spun to a Minumum of .050 Thickness! Finished Weight of 4.19 Pounds!

All cutouts, bolt holes, counterbore holes, etc. done for you!

Nutplates attached! Spinner Screws and Washers Included!

100% Inspection By Sensenich Quality Assurance

Each Piece Can Be Purchased Separately AND All Parts Interchangable!

Comes Alodined, Ready For You To Prime And Paint

Can Be High Polished (by you!)

 

[RV_7A]

Thanks guys!

-Jeff

 

[Rick6a]

Does anyone know who carries a spun aluminum spinner that has a gold type of anodizing on it. I've seen these on planes at Sun-N-Fun but don't know who manufatures them.

-Jeff

Yep, sure do, its Sensenich. Its called the "bolt on solution". It includes the front and rear backing plates and are NOT interchangeable with Van's spinner parts. The golden colored spinner (and 2 backing plates) come with very decernible circular machining ridges similiar in texture to that of an old vinyl LP record and I spent many hours buffing the surface smooth to finally attain a highly polished spinner. See my picture in the thread "Ricks Plane Perspective" for a close up shot of the spinner.

Rick Galati RV-6A "Darla"