[richardsmi]

My third Honeywell oil pressure sensor has failed (pressure readings all over the place!)
Does anyone know what alternative senders can be fitted to the RV12 with a Rotax 912 and a Dynon D180 without major modifications?

 

[mrt890]

Kavlico

http://www.dynonavionics.com/downloads/Install_Guides/Addendum_Kavlico_Sensors-Rev_B.pdf

Have you moved the oil pressure sender to the firewall? If not, you should.

 

[richardsmi]

RV12: connecting VDO oil pressure sensor to D 180

I am going to fit a VDO sensor to measure oil pressure on my Rotax as I have had it with the Honeywell sensor. Can I connect it to the wires from the Dynon D 180 which fed the Honeywell unit.... and if not what do I need to do to get a proper pressure reading?