TCONROY
Well Known Member
I just finished the horizontal induction air scoop for our stock YIO-360-M1B, man what a pain! I had to hack it in half like many here have done. After glassing the two halves back together I went to mark where the alternate air door hole cutout will be and found it will interfere with the #2 cylinder oil return line (I think that is what that is..)
I had to cut our air scoop in half because it extended too far outboard from the valve cover and interfered with the Cyl 2 side baffle. Now that the filter is in line with the cowl inlet, it seems the air scoop is too far inboard and the alt air door will hit that oil line.
Looking for ideas please
I had to cut our air scoop in half because it extended too far outboard from the valve cover and interfered with the Cyl 2 side baffle. Now that the filter is in line with the cowl inlet, it seems the air scoop is too far inboard and the alt air door will hit that oil line.
Looking for ideas please