[mhflyit]

My FWF kit has the bendix control brackets and I have the airflow fuel injection system which the brackets don't fit. Will new brackets need to be fabricated as airflow suggest or is there a source for these?

Best

 

[dan]

...horizontal or vertical sump?

 

[mhflyit]

Horizontal.

 

[dan]

Fab time. If somebody knows of a bracket kit for AFP on a horizontal sump, definitely lemme know!

 

[dan]

FYI, I routed my throttle cable in from the left side:

Mixture, I came from the back and bolted to the bottom of the sump:

I ended up rotating the AFP servo 90 degrees to make all of this work. I know at least one builder here in SoCal who managed to make it work without doing that...throttle came in from back/under as well.

Use your imagination and any "bosses" on the sump you can. Let us know what you come up with.

 

[mhflyit]

Dan,

I'll let you know. The pictures are terrific - thx.

Best,

 

[mhflyit]

As promised here are pictures of the control cable brackets and points of attachment for my engine/airframe combination.

Thx to those that helped me on this.

Best