[Greg Arehart]

After two years of flying, my paint is starting to show some chips and wear. I have some touchup two-part Imron paint. Not being much of a painter, I'm unfamiliar with techniques, but am willing to give a try at doing some touchup. My thought is that the places needing work are pretty small, so an airbrush might be the proper tool. So, I'm looking for suggestions on a not-so-expensive airbrush plus any technique tips for blending the finish. Or any other tools/techniques that would work. I do not have a clear coat for just this reason.

Thanks for the input.

cheers,
greg