[Wiley]

currently building the ailerons and noticed the plans call for .040 alclad for the doubler plate. I've checked my stock and the packing list and do not find any. Was this included in the trim bundle? Will the .035 work? Any one else have a similar problem?

Thanks

 

[EricB]

Check little brown bags

I don't recall exactly but the doublers may have been in one of the brown paper or clear plastic bags. A number of small pieces of AL are thown in there. Let us know.

Eric
RV-7 finishing Fuse

 

[Norman CYYJ]

No don't use .032 use .040 if that is what the plans call for. You might find the plates in one of the bags. Double check the AL in the kit it should be there.