Tbone
Well Known Member
Was fitting the wings on the -7 and need to set the ailerons in their "neutral" postition. At OSH this year I was asking one of the Van's boys how. He said to use a straight edge on the upper surface of the wing and follow trail with the aileron. I tried that and the aileron was about an inch or so above the flaps, which are already fitted. I did read to use the small holes in the rib to set the aileron. What, if any, is the "easy" way?
Regards,
Tbone
RV-7 QB
Regards,
Tbone
RV-7 QB