[Stockmanreef]

I put the wings together a long time ago. I am trying to figure out if I am going to be annoyed or not. Are the bellcrank brackets put in with nuts or nut plates? My fuel tanks are on and I don't know if there is a way to figure this out without taking off the fuel tank. I looked at the plans and it is unclear if there is a nut plate on the other side of the spar.

The reason I ask, is that there is a bracket that connects the top and bottom brackets together for the servo.

 

[mturnerb]

Nutplates behind them. See section 13, page 5

 

[DougZetting]

Just did it last week or so, there is a nut plate.

 

[Stockmanreef]

I just found it in the plans. Thanks