I clecoed my aft fuselage together today. Wow! Pretty cool to see it take shape so quickly after all the prep.
In doing so I ended up with a couple of questions.
The first one has to do with the rear tail cone. It appears that I need to bend it a fair amount in order to get it to line up properly with the skins. I have put a substantial amount of pressure on it and it just pops back to its original shape. I cna apply more pressure but thought I would see if anyone had any good suggestions on getting this correct.
Secondly, after getting everything clecoed together I put the plumbbob on it and it appears to be out of square by 1/32 or a little more on the front. Not over a 1/16 though. All of the holes line up good and I am afraid that trying ot fix it might cause bigger problems. Should I leave it or try to fix it?
Thanks,
![aftfuse.jpg](/community/proxy.php?image=http%3A%2F%2Fagfp.com%2Frv7%2Faftfuse.jpg&hash=40add58846673ce5c0e965bcebd0bd91)
In doing so I ended up with a couple of questions.
The first one has to do with the rear tail cone. It appears that I need to bend it a fair amount in order to get it to line up properly with the skins. I have put a substantial amount of pressure on it and it just pops back to its original shape. I cna apply more pressure but thought I would see if anyone had any good suggestions on getting this correct.
![tail.jpg](/community/proxy.php?image=http%3A%2F%2Fagfp.com%2Frv7%2Ftail.jpg&hash=49dba7ea896c3bdcd0e8321ef46c1920)
Secondly, after getting everything clecoed together I put the plumbbob on it and it appears to be out of square by 1/32 or a little more on the front. Not over a 1/16 though. All of the holes line up good and I am afraid that trying ot fix it might cause bigger problems. Should I leave it or try to fix it?
Thanks,
Last edited: