Berchmans Well Known Member Sep 26, 2012 #1 I am looking at my battery cable and it interfers with the aeleron push rods slightly. I am pondering how address the issue by maybe attaching an Able clamp to the floor of the plane...anyone have a cleaner approach?
I am looking at my battery cable and it interfers with the aeleron push rods slightly. I am pondering how address the issue by maybe attaching an Able clamp to the floor of the plane...anyone have a cleaner approach?
panhandler1956 Well Known Member Sep 26, 2012 #2 Burke, Here's how I did mine (picture taken during construction). The orange wire is the battery cable. The adel was put on the structure, not the bottom skin. Link to my build-site: www.mykitlog.com/owens
Burke, Here's how I did mine (picture taken during construction). The orange wire is the battery cable. The adel was put on the structure, not the bottom skin. Link to my build-site: www.mykitlog.com/owens
Berchmans Well Known Member Sep 26, 2012 #3 well sure sometimes you can't see the forest for the trees...
M mlwynn Well Known Member Sep 27, 2012 #4 routing the wire I did basically the same thing. Adel clamp on the stringer that runs from the spar carry-though to the rear spar. Works fine. Regards, Michael Wynn RV 8 Finishing San Ramon, CA
routing the wire I did basically the same thing. Adel clamp on the stringer that runs from the spar carry-though to the rear spar. Works fine. Regards, Michael Wynn RV 8 Finishing San Ramon, CA