Jpm757
Well Known Member
I have had problems with avionics shops trying to perform a VFR transponder check on my AFS 5600.
The transponder output is inhibited when the aircraft is static. If you go to the transponder config. page and turn off #11 (air data) that will inhibit the transponder. This is not a problem when performing an IFR static check as the air data function is activated with pitot static pressure.![Screenshot_20240704_083938_Messages.jpg Screenshot_20240704_083938_Messages.jpg](https://vansairforce.net/data/attachments/44/44520-9316a5b20344e5aaaf28fde9004750db.jpg)
The transponder output is inhibited when the aircraft is static. If you go to the transponder config. page and turn off #11 (air data) that will inhibit the transponder. This is not a problem when performing an IFR static check as the air data function is activated with pitot static pressure.
![Screenshot_20240704_083938_Messages.jpg Screenshot_20240704_083938_Messages.jpg](https://vansairforce.net/data/attachments/44/44520-9316a5b20344e5aaaf28fde9004750db.jpg)