[N402RH]

Our panel business continues to grow at a rapid rate with lots of new panels going out the door this month.

Drawing showing how our Advanced Control Module gets connected in an airplane.

CubCrafter Carbon Cub, we had to laser cut, hydro-form and then heat treat the panel before powder coating.

RV-14 IFR Skyview Panel

RV-14 AF-5600T panel with 2020 GPS and Garmin GNC-255 Nav/Com with a white panel.

RV-14 IFR AF-5600T panel with vertical mounted radios

RV-10 IFR Panel

IFR RV-10 panel going to Australia with an Avidyne IFD540 and Garmin 225 radio and Dynon D6 on the left.

RV-7 Tip Up VFR Panel with AF-5600T

Custom RV-7 Tip Up panel layout with AF-5600T EFIS screens.

Rob Hickman
Advanced Flight Systems Inc.
N402RH RV-10

 

[John Owen]

Panels

Have you done any RV-8s?

Thanks.
John

 

[N402RH]

We have done a number of RV-8's

The very first Quick Panel we sold was for an RV-8 and it won a Bronze Lindy at Oshkosh this year.

The ultimate RV-8 IFR Panel, we have built three of these panels.

RV-8 VFR Panel

Rob Hickman
Advanced Flight Systems Inc.
N402RH RV-10

 

[RV-4]

Quick Panel

Hi Rob

Have you done any RV-4s?

It will be nice to see one

Thanks

Bruno

 

[fl9500]

Hi Rob,

Have you done any RV-6s?

I am thinking about a complete new Panel for my 14 Year old...

Achim

 

[N402RH]

We can do a panel for an RV-4 or an RV-6, the main issue with the older Van's planes is that the panels and mounting holes were not pre-punched and they are all different. We have lots of RV-4 experience, before the RV-10 we had a RV-4 that we used for testing and I think we changed the panel about 5 times.

Rob Hickman
Advanced Flight Systems Inc.
N402RH RV-10

 

[RV-4]

RV-4 PANEL

Ok thanks Rob, I'll keep that in mind.

Bruno
[email protected]