RV10Rob
Well Known Member
Hi, all... when turning on my AFP electric fuel pump with the engine off, I'm seeing pressure stabilize at 78 psi, which I know is high. After I first turn it on, it builds pressure for a couple seconds, then I hear a "pop" when it stabilizes at 78. Could this be something wrong with the bypass valve?
BTW, during my engine ground run, with the electric pump off, I was seeing 27-28 psi, so don't think it's the transducer.
Thanks..,
-Rob
BTW, during my engine ground run, with the electric pump off, I was seeing 27-28 psi, so don't think it's the transducer.
Thanks..,
-Rob