N402RH
Well Known Member
I received a call while at lunch today from Wally at Synergy Air in Eugene. Their RV-8 customer was ready for us to test-fit his new Advanced Quick Panel. An hour later Jeffrey, (our chief SolidWorks panel engineer) and I were headed to Eugene in the RV-10 with a new RV-8 panel and all the modules.
New Advanced RV-8 Quick Panel in the customer's RV-8 fuselage. The Advanced Control Module fits perfectly in the RV-8.
You can even see the fuses from the pilot's seat.
Here is a picture of a customer's Advanced RV-7 IFR Quick Panel, powder-coated and ready for silk-screening.
We are currently building 5 identical panels, 3 are sold and 2 need homes. They will fit a RV-7 or RV-9 slider. So, if you are looking for a Christmas present we have you covered without the usual wait to have a panel built.
These panels are completely engineered down to the washers, using 3D modeling in SolidWorks, and come with complete schematics and installation instructions. All you need to do is mount the remote components and plug in the supplied harnesses.
Rob Hickman
N402RH RV-10
Advanced Flight Systems Inc.
New Advanced RV-8 Quick Panel in the customer's RV-8 fuselage. The Advanced Control Module fits perfectly in the RV-8.
You can even see the fuses from the pilot's seat.
Here is a picture of a customer's Advanced RV-7 IFR Quick Panel, powder-coated and ready for silk-screening.
We are currently building 5 identical panels, 3 are sold and 2 need homes. They will fit a RV-7 or RV-9 slider. So, if you are looking for a Christmas present we have you covered without the usual wait to have a panel built.
These panels are completely engineered down to the washers, using 3D modeling in SolidWorks, and come with complete schematics and installation instructions. All you need to do is mount the remote components and plug in the supplied harnesses.
Rob Hickman
N402RH RV-10
Advanced Flight Systems Inc.
Last edited: