[claycookiemonster]

The pop rivets holding the rolled leading edges together. All the directions say is to "drill the hole full size". The pre-drilled holes look to be #40, but the rivet looks to be close to 1/8"
Silver clecoes or Brass ones?

 

[plehrke]

Google Is your friend

http://catalog.swaco.com/item/rivets-rivet-nuts/open-end-rivets/ad41abs

 

[claycookiemonster]

Wrong generation

Yea, I knew that. I searched and searched thru my Encyclopedia Britannica; couldn't find anything.

 

[plehrke]

Yea, I knew that. I searched and searched thru my Encyclopedia Britannica; couldn't find anything.

Nope, you were the "right generation". Flying F-111s way cooler then searching stuff on Google. Nobody in this generation will ever be able to log F-111 time.

 

[claycookiemonster]

Thanks

Thanks Plehrke;
The 'Vark was a very cool plane. Way fast and way low at the same time: 540 kts at 200 ft was standard!