Mark Albery
Well Known Member
I was about to connect up the 4-pin Din plug to the ACK ELT, but there seems to be a discrepancy between the ACK installation manual and Van's instructions at page 53-04.
I assume the view of the terminals is interpreted as looking at the solder pins, but the ACK manual shows a mirror image of the Van's.
I would guess that the ACK manual is likely to be correct. Can anyone confirm?
I assume the view of the terminals is interpreted as looking at the solder pins, but the ACK manual shows a mirror image of the Van's.
I would guess that the ACK manual is likely to be correct. Can anyone confirm?