[m20e]

I'm installing the servo brackets in my 8, the instructions from dynon are a little vague..they say it's the builders responsibility to mount it..my question is should it be riveted in place or does the bolt going thru the belcrank all that holds it in place..it's a post 2006 kit.

 

[Don Patrick]

Check this out.

If you haven't done so, you can go to Mykitlog.com and search other builders and see what they have done.

Here's what Steve Riffe has done with his:

http://www.mykitlog.com/users/display_log.php?user=skyking90200&project=832&category=6867&log=140940&row=126

Cheers,

Don

 

[m20e]

Thanks Don for steering me in the right direction