G'day.
I'm contemplating taking over a 9A quick build project. No work has been done on the fuse at this point. The kit was delivered for a tip up canopy. Without sparking the Tip up vs Slider debate, is it difficult/viable to complete the airframe with a sliding canopy by ordering the appropriate drawings and parts.
My assumption is that the QB fuse's are supplied with either a "tip up" or "slider" sub kit, but are otherwise identical. There is no finishing kit associated with this project yet.
Thanks in anticipation
Michael
I'm contemplating taking over a 9A quick build project. No work has been done on the fuse at this point. The kit was delivered for a tip up canopy. Without sparking the Tip up vs Slider debate, is it difficult/viable to complete the airframe with a sliding canopy by ordering the appropriate drawings and parts.
My assumption is that the QB fuse's are supplied with either a "tip up" or "slider" sub kit, but are otherwise identical. There is no finishing kit associated with this project yet.
Thanks in anticipation
Michael