Status
Not open for further replies.
R

RVTOY

Well Known Member
I purchased a 796 that allows XM to be installed at anytime in the future but wiring harness dos not come as bare wire. I planned on connecting to Dynon D100 for A/P but there is no wires to hookup. Garmin what are you thinking!!. I made a slit in the wire leaving the mount and all colors are present except Blue. And there is another shielded bundle I assume to be for XM. Anyone know if There is a chance of using this harness or give Garmin another $60
 
I routinely caution people not to cut open Garmin pre-made cables expecting the extra wires to be there. I did this once and learned my lesson way back in the 296 days...

This is the cable you need:

11-10044.jpg
 
Status
Not open for further replies.