[lucaperazzolli]

I've got my 60Amp CB ( pn. ES CB 1648-009-060 ) from Vans.

In order to set my side right panel with all my CBs, I would like to know how I can put together the klixon CBs and the HUGE (dimension) 60 Amp CB with the same copper buss bar.

Photos welcome

Thanks in advance

 

[w1curtis]

Not easy. You could try some fancy metal bending but I just used a short 8AWG patch. See short curved wire from the white CB in the photo at the below link:

http://nerv10.com/wcurtis/90Electrical/EL1f.html

 

[rv9av8tr]

60A Alternator jumper

I looked real hard about running a copper bus bar and gave up, instead ran a #8 jumper wire from the breaker to the bus.
http://www.mykitlog.com/users/display_log.php?user=n539rv&project=161&category=3987&log=65433&row=39

Also, you'll notice the breaker body is "loose" to the shaft of the breaker, unlike all the other breakers. When you mount it to the panel, the breaker body will rattle around. I was uncomfortable with what kind of fatigue that might result over time. I modified a nylon washer to act as a shim behind the panel so it would snug up to the panel.
http://www.mykitlog.com/users/display_log.php?user=n539rv&project=161&category=3987&log=65431&row=40