[pierre smith]

I'm trying to upgrade my 430W obstacle database but need the programmer that Garmin sells for near $200 (according to them).

Do any of you guys have the 'adapter?' that I can rent/borrow?

Thanks,

 

[DeltaRomeo]

Pierre,
Will the Skybound G2 work on the obstacle DB? I just bought one for the NavData cards, and it was $60.

Link:
http://jeppdirect.jeppesen.com/product_details.jsp?id=prod410002_ca

(I get my obstacle clearance through the G3X....using the 430W for approaches coupled to the a/p).

v/r,
dr

I'm trying to upgrade my 430W obstacle database but need the programmer that Garmin sells for near $200 (according to them).

Do any of you guys have the 'adapter?' that I can rent/borrow?

Thanks,

 

[pierre smith]

Doug, Garmin told me this morning that I needed the Garmin programmer because the obstacle card is a little thicker than the navdata card and I bought one just like yours and the rep told me that's the wrong one.

Thanks anyway,

[ed. You're very welcome! dr]

 

[BillFear]

Will this help

Pierre,

I have the Jeppesen Skybound adapter (part number NDDKYUSB) that I use for the data cards on the XL300, will this work? if yes, i will send it to you to borrow. It has plug in slots marked Garmin, PCMCIA and EDGE.

 

[pierre smith]

Bill, the cards appear to be different but I don't know for sure. I'll try and find out,

Thanks,

 

[larrynew]

Here's a good post with more information on the 430W obstacle database.

...but you must use the Garmin proprietary data card reader which is available for $150! The Garmin rep recommended that if you want to update your obstacle database to find someone near you who already has the data card reader and see if you can borrow it.

http://www.vansairforce.com/community/showpost.php?p=624403&postcount=7

 

[[email protected]]

I've got one

If your up near Atlanta any time soon you can borrow mine.
Otherwise I can mail it.
Not sure which model I have, but I have used it with both 430 cards before.

 

[pierre smith]

Thanks Bill....PM sent,

Best,