[lostpilot28]

As posted in another thread, I'm building an ECI 0-360 kit. The tach-drive shaft sits in the crankshaft gear and has a spacer under it and a circlip on top to hold it in place. The spacer part number listed in the Overhaul manual is 76118, but my ECI kit doesn't list that part number anywhere.

Does anyone know if this spacer is necessary and if so, what the ECI part number is? Or if they could describe the spacer that may be helpful.

Thanks.

 

[Radomir]

IIRC it's already on the cam... that little center piece... Hope someone can confirm.

 

[lostpilot28]

Hi Radomir...you're correct - it's on the cam gear, not the crank like I thought.