|
-
POSTING RULES
-
Donate yearly (please).
-
Advertise in here!
-
Today's Posts
|
Insert Pics
|
04-26-2013, 03:33 PM
|
 |
|
|
Join Date: Oct 2005
Location: Estes Park, CO
Posts: 3,931
|
|
Tip: Rivet head tool
Here's a goofy tip. I use broken or worn out bits to pop the rivet head off of a drilled rivet. The other day, I noticed Sweetie is keeping wine corks. So I took two of the new style fiber corks and two bits (#30 & #40) and just ran the bit into the cork. Presto! Rivet tool with a handle. 
__________________
Larry Larson
Estes Park, CO
http://wirejockrv7a.blogspot.com
wirejock at yahoo dot com
Donated 12/03/2019, plus a little extra.
RV-7A #73391, N511RV reserved (2,000+ hours)
HS SB, empennage, tanks, wings, fuse, working finishing kit
Disclaimer
I cannot be, nor will I be, held responsible if you try to do the same things I do and it does not work and/or causes you loss, injury, or even death in the process.
|
04-26-2013, 06:32 PM
|
 |
|
|
Join Date: Oct 2009
Location: Victoria, BC, Canada
Posts: 3,926
|
|
Great idea! Hmm... I have some champagne corks... That would make a handle with a nice knob on the end...
__________________
Rob Prior
1996 RV-6 "Tweety" C-FRBP (formerly N196RV)
|
05-01-2013, 03:45 PM
|
|
|
|
Join Date: Oct 2005
Location: Estes Park, CO
Posts: 3,931
|
|
handles
I've also got a ton of old golf balls. When it stops snowing up here, I plan to use a few of them for handles too!
__________________
Larry Larson
Estes Park, CO
http://wirejockrv7a.blogspot.com
wirejock at yahoo dot com
Donated 12/03/2019, plus a little extra.
RV-7A #73391, N511RV reserved (2,000+ hours)
HS SB, empennage, tanks, wings, fuse, working finishing kit
Disclaimer
I cannot be, nor will I be, held responsible if you try to do the same things I do and it does not work and/or causes you loss, injury, or even death in the process.
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 07:26 PM.
|
Linear Mode
