Egt mounting location for lycoming - VAF Forums

VansAirForceForums

Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!
- Today's Posts | Insert Pics

		VAF Forums > RV Firewall Forward Section > Traditional Aircraft Engines
Egt mounting location for lycoming

Reply

Search this Thread

#1

Old

04-20-2013, 10:17 AM

n82rb

n82rb is offline

Join Date: Jan 2007

Location: fort myers fl

Posts: 945

Default

Egt mounting location for lycoming

I'm starting thin install of my skyview. Looking for the proper distance for the egt probe location. Thanks

Bob burns
rV-4 N82RB

Reply With Quote

#2

Old

04-20-2013, 10:21 AM

Mike S

Mike S is offline

Senior Curmudgeon

Join Date: Sep 2005

Location: Dayton Airpark, NV A34

Posts: 15,408

Default

Proper distance is not as critical as all pipes being the same distance.

Mine are at two or three inches from the flange, pretty typical distance.

__________________
Mike Starkey
VAF 909

Rv-10, N210LM.

Flying as of 12/4/2010

Phase 1 done, 2/4/2011

Sold after 240+ wonderful hours of flight.

"Flying the airplane is more important than radioing your plight to a person on the ground incapable of understanding or doing anything about it."

Reply With Quote

Reply

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts vB code is On Smilies are On [IMG] code is On HTML code is Off

Forum Jump

All times are GMT -6. The time now is 09:30 PM.