Bulkhead spacers - VAF Forums

		VAF Forums > RV Firewall Forward Section > Propellers
Bulkhead spacers

Thread Tools

Search this Thread

Display Modes

04-04-2013, 06:19 PM

g zero

Join Date: Jun 2007

Location: palm coast fl.

Posts: 945

Bulkhead spacers

I picked up a Harzell hub ( scrapped / red tagged ) to use mocking up my cowl . Drawing C-4 spinner installation shows four 1/4" spacers and one washer between the rear bulkhead and the prop hub . The plans say the spacer is supplied with the prop . My question is the rear bulkhead torqued in assembly with one nut holding the bulkhead to the hub or is there two nuts , one to torque the hub halfs together and another holding the rear bulkhead on ?
Thanks, Tom

__________________
Rv8
N 666 TA
First Flight 2-3-2015 🚀
2017 donation paid

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts vB code is On Smilies are On [IMG] code is On HTML code is Off

Forum Jump

All times are GMT -6. The time now is 06:45 PM.

The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.