OK, so I want most of my powder coated weldments to be a different color. Do I need to take them to a powder coating place and have them sandblasted and recoated or can I rough up the powder coat and paint them myself?
Yes. Either works. I personally prefer the former but you can paint powder coat. The normal rules apply - rough it up and then clean it thoroughly before painting.
__________________
Patrick Kelley - Flagstaff, AZ
RV-6A N156PK - Flying too much to paint
RV-10 14MX(reserved) - Fuselage on gear http://www.mykitlog.com/flion/
EAA Technical Counselor #5357
When I applied the rudder pedal SB to my -6, I sandblasted them and repainted. No issues, other than my sprayed-on finish isn't anywhere near as tough as the powder coat would be.
__________________ Rob Prior
1996 RV-6 "Tweety" C-FRBP (formerly N196RV)
I ended up taking mine into a powdercoating service and they stripped and re-coated with a new color. Turned out really nice and just as durable as the original finish.
__________________ Jim Piavis
RV-7 (Flying!) http://adap.com/rv7
Redmond, WA
Painting Over Powder Coat?
Linear Mode
