|
-
POSTING RULES
-
Donate yearly (please).
-
Advertise in here!
-
Today's Posts
|
Insert Pics
|
05-13-2012, 08:17 AM
|
|
|
|
Join Date: May 2005
Location: San Ramon, CA
Posts: 402
|
|
Fuel Pump Fittings
Hi all,
I am trying to connect a standard Lycoming fuel pump to a fuel injection servo with a line to a fuel pressure sensor. The ideal fitting would come straight out from the pump with a T for the fuel pressure fitting. The only T-fitting I have been able to find is the one Vans sells. This has a right angle for the fitting to the servo and straight for the fuel pump. Does anyone have a source for the fitting above or should I just figure out how to deal with that configuration?
Any good photos? This is an RV 8 with a TMX IO360M1B with Airflow Injector.
Thanks,
Michael Wynn
RV 8 Finishing
|
05-13-2012, 02:57 PM
|
|
|
|
Join Date: Apr 2010
Location: Ridgeland, SC
Posts: 2,584
|
|
Michael---you want a -6 & -4 inline tee, with a -6 o'ring boss fitting for mounting to the pump. Make sure you can screw the fitting in the pump without interfering with anything. The industrail # would be a 6803-06-06-04NWO.
Tom
__________________
Tom Swearengen, TS Flightlines LLC, AS Flightlines
Joint Venture with Aircraft Specialty
Teflon Hose Assemblies for Experimentals
Proud Vendor for RV1, Donator to VAF
RV7 Tail Kit Completed, Fuse started-Pay as I go Plan
Ridgeland, SC
www.tsflightlines.com, www.asflightlines.com
Last edited by TS Flightlines : 05-13-2012 at 03:27 PM.
Reason: added part #
|
05-13-2012, 11:29 PM
|
|
|
|
Join Date: May 2005
Location: San Ramon, CA
Posts: 402
|
|
Fitting
Thanks, Tom. Any idea where I would find this?
Regards,
Michael Wynn
|
05-13-2012, 11:37 PM
|
 |
Senior Curmudgeon
|
|
Join Date: Sep 2005
Location: Dayton Airpark, NV A34
Posts: 15,408
|
|
__________________
Mike Starkey
VAF 909
Rv-10, N210LM.
Flying as of 12/4/2010 
Phase 1 done, 2/4/2011
Sold after 240+ wonderful hours of flight.
"Flying the airplane is more important than radioing your plight to a person on the ground incapable of understanding or doing anything about it."
|
05-14-2012, 01:53 PM
|
|
|
|
Join Date: Apr 2010
Location: Ridgeland, SC
Posts: 2,584
|
|
Michael, this tee fitting isnt generally used in aircraft so it might be tough. Weatherhead, nor Parker make it, but some indutrial houses can get it . Try Tom Brink at Gahco-----he may. If not, email me.
Tom
__________________
Tom Swearengen, TS Flightlines LLC, AS Flightlines
Joint Venture with Aircraft Specialty
Teflon Hose Assemblies for Experimentals
Proud Vendor for RV1, Donator to VAF
RV7 Tail Kit Completed, Fuse started-Pay as I go Plan
Ridgeland, SC
www.tsflightlines.com, www.asflightlines.com
|
05-14-2012, 06:48 PM
|
 |
|
|
Join Date: Apr 2007
Location: -
Posts: 501
|
|
Looks like these guys may have it for ~$17:
http://www.motionindustries.com/
(no relation, just a googling) |
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 09:53 PM.
|
Linear Mode
