Rod ends

[Ron B.]

It's difficult ordering rod ends when you don't know the rod end designations. I ordered two of what I thought were the same as Van's supplies, what I ordered is M34-14M at $35.00@ as that is all I could figure out on-line. Today I open a catalog and right there in my face I see the Aurora equivalent , GMM-3M-470 (just like on the RV) for $10.50. I opened the bag today but hoping I can return them and swap them out.
I'm now looking for a 10-32, with .1900 hole in the ball (Van's P/N, CT Bearing MW-3M) but cannot find it in the ACS catalog. Any help?
Thanks Ron

didn't state whether male or female. Vans might be using heims which are more expensive. I found a male, .190 bore, .190 thread HM-3M.

[Ron B.]

Paul
I'm looking for a female and those I checked were Aurora on the RV.
Thanks Ron

HF-3M. M dimension .1900-32. bore .1900

[Junglepilot]

Aurora MW-3M-500

3/16' bore
10-32 Female

MacFarlane: http://www.mcfarlane-aviation.com/Pr...ber=MW-3M-500&

Van's price is best though (2 for 1 price).