VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics


Go Back   VAF Forums > Avionics / Interiors / Fiberglass > GPS
Register FAQ Members List Calendar Today's Posts

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 01-08-2012, 04:02 PM
RV8iator's Avatar
RV8iator RV8iator is offline
 
Join Date: Nov 2006
Location: Saint Simons Island , GA
Posts: 1,520
Default GNC300 to Dynon

Question..
I just installed a GRT system with D10A as a backup EFIS. I have a Garmin GNC300 gps that is wired to the GRT and I have a wire coming out of the 300 that goes to pin 22 on the D10. The gps will talk to the GRT but the Dynon doesn't recognize it. I'm using the Faststack system and have checked the diagram and backprobed the wires and they are correct.
I think the problem is that the Garmin is outputting "aviation" data and the Dynon is looking for NMAE 186 at 4800 baud. (That is the way the Dynon used to read info from my 496)
My question is, is there a way to tell the Dynon what kind of data stream to look for?
Inquiring minds want to know how to get this think talking to each other. Everything else in the whole setup works except for the Dynon. I have the 300, an SL30 and a 496 all talking with each other and the GRT.
__________________
Jerry "Widget" Morris
RV 8, N8JL, 3,000+ hours on my 8.

VAF #818
Saint Simons Island, GA. KSSI
PIF 2008, 2009, 2010, 2011,2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020

I just wish I could afford to live the way I do
Reply With Quote
  #2  
Old 01-08-2012, 07:05 PM
Brantel's Avatar
Brantel Brantel is offline
 
Join Date: Mar 2006
Location: Newport, TN
Posts: 7,496
Default

This is all covered in the D10 install manual and the Dynon WIKI.

It will work fine when you set it up correctly.

If I get a chance, I will copy the settings here.
__________________
Brantel (Brian Chesteen),
Check out my RV-10 builder's BLOG
RV-10, #41942, N?????, Project Sold
---------------------------------------------------------------------
RV-7/TU, #72823, N159SB
Lyc. O-360 carbed, HARTZELL BA CS Prop, Dual P-MAGs, Dual Garmin G3X Touch
Track N159SB (KK4LIF)
Like EAA Chapter 1494 on Facebook
Reply With Quote
  #3  
Old 01-08-2012, 07:13 PM
Brantel's Avatar
Brantel Brantel is offline
 
Join Date: Mar 2006
Location: Newport, TN
Posts: 7,496
Default

From the EFIS menu, enter SETUP >HSI >EFIS_SERIAL; In that menu select the INPUT to be AVIATION and the BAUD RATE to be 9600.
__________________
Brantel (Brian Chesteen),
Check out my RV-10 builder's BLOG
RV-10, #41942, N?????, Project Sold
---------------------------------------------------------------------
RV-7/TU, #72823, N159SB
Lyc. O-360 carbed, HARTZELL BA CS Prop, Dual P-MAGs, Dual Garmin G3X Touch
Track N159SB (KK4LIF)
Like EAA Chapter 1494 on Facebook
Reply With Quote
  #4  
Old 01-08-2012, 08:04 PM
RV8iator's Avatar
RV8iator RV8iator is offline
 
Join Date: Nov 2006
Location: Saint Simons Island , GA
Posts: 1,520
Default Outstanding

Thanks, I punched that in and it works like a champ. Thanks for the help.

I love this site and all the knowledge that is at our fingertips.
__________________
Jerry "Widget" Morris
RV 8, N8JL, 3,000+ hours on my 8.

VAF #818
Saint Simons Island, GA. KSSI
PIF 2008, 2009, 2010, 2011,2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020

I just wish I could afford to live the way I do

Last edited by RV8iator : 01-08-2012 at 08:44 PM.
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 09:24 PM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.