VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics


Go Back   VAF Forums > Main > RV General Discussion/News
Register FAQ Members List Calendar Today's Posts

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 11-04-2011, 06:07 PM
chrispratt's Avatar
chrispratt chrispratt is offline
Super Moderator
 
Join Date: Oct 2005
Posts: 752
Default XM Antenna Mounting Screws

Finally getting around to mounting my XM weather antenna under the cowl. The XM manual says the mounting screws are: M3 x 0.5. Can anyone translate what "M3" means in Home Depot terms? I'm assuming the 0.5 is length in inches. Thanks.

Chris
__________________
Chris Pratt (2020 VAF DUES PAID)
RV-8 Flying, 850+hours
N898DK
Lycoming O-360-A1A, Hartzell CS
52F (Northwest Regional, Aero Valley, Whatever, TX)
Reply With Quote
  #2  
Old 11-04-2011, 06:13 PM
ccsmith51's Avatar
ccsmith51 ccsmith51 is offline
 
Join Date: Jul 2010
Location: Orlando, FL
Posts: 1,077
Default

Quote:
Originally Posted by chrispratt View Post
Finally getting around to mounting my XM weather antenna under the cowl. The XM manual says the mounting screws are: M3 x 0.5. Can anyone translate what "M3" means in Home Depot terms? I'm assuming the 0.5 is length in inches. Thanks.

Chris
I believe that an M3 x 0.5 is a screw where the diameter is 3.0 mm and the thread pitch is 0.5 mm.
__________________
Chris Smith
Maule M5-180C (Sold)
RV-6 O-360 CS (Sold)
RV-4 O-360 FP (Sold)
Full-time in the other type of RV....
Reply With Quote
  #3  
Old 11-04-2011, 09:46 PM
bruceh's Avatar
bruceh bruceh is offline
 
Join Date: Mar 2008
Location: Ramona, CA
Posts: 2,368
Default

Go to the metric section of the hardware bins
__________________
Bruce Hill
RV-9A N5771H flown over 800 hours!
http://www.overthehills.com/RV-9A-Project
APRS Tracking for KJ6YRP and New Flying Blog
2020 VAF donator
EAA Tech Counselor, Build assistance - canopy/tanks/fiberglass/electrical/repairs
Reply With Quote
  #4  
Old 11-04-2011, 10:13 PM
PCHunt PCHunt is offline
 
Join Date: Feb 2007
Location: San Diego, CA
Posts: 1,670
Default

Y'know......... if we'd just gone metric back in the '70's, ..............
Reply With Quote
  #5  
Old 11-05-2011, 06:39 AM
chrispratt's Avatar
chrispratt chrispratt is offline
Super Moderator
 
Join Date: Oct 2005
Posts: 752
Default

Thank you. Leave it to a U.S. company to use metric. Go figure.

Chris
__________________
Chris Pratt (2020 VAF DUES PAID)
RV-8 Flying, 850+hours
N898DK
Lycoming O-360-A1A, Hartzell CS
52F (Northwest Regional, Aero Valley, Whatever, TX)
Reply With Quote
  #6  
Old 11-05-2011, 09:41 AM
Chino Tom's Avatar
Chino Tom Chino Tom is offline
 
Join Date: Jun 2005
Location: Chino, CA
Posts: 738
Default Hobby store

Most R/C hobby stores have those size screws.
__________________
Tom Prokop
Chino, CA
RV-8A,180/CS/Carb, AFS 4500 EFIS/EMS
RV-6, sold, 820 hrs of fun.
Reply With Quote
  #7  
Old 11-05-2011, 09:45 AM
az_gila's Avatar
az_gila az_gila is offline
 
Join Date: Jan 2005
Location: 57AZ - NW Tucson area
Posts: 10,011
Default

Quote:
Originally Posted by Chino Tom View Post
Most R/C hobby stores have those size screws.
...and Ace Hardware stores...
__________________
Gil Alexander
EAA Technical Counselor, Airframe Mechanic
Half completed RV-10 QB purchased
RV-6A N61GX - finally flying
Grumman Tiger N12GA - flying
La Cholla Airpark (57AZ) Tucson AZ
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 01:18 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.