VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!
- Today's Posts | Insert Pics


Go Back   VAF Forums > Avionics / Interiors / Fiberglass > Electrical Systems
Reload this Page Shrink tube
Register FAQ Members List Calendar Today's Posts

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 09-29-2011, 09:00 PM
Don Patrick's Avatar
Don Patrick Don Patrick is offline
 
Join Date: Feb 2010
Location: GTA, Ontario
Posts: 825
Default Shrink tube
I have an easy questions. I'm soldering the wires to the BNC connectors for my capacitive tanks. Is it a problem to put some shrink tube over the soldered joint, and then cover it with proseal?

The soldered joint appears to be nice and strong, but I just want to make sure that it won't impact anything by adding the heat shrink tube.

Thanks

DP
__________________
RV-8 build
DONE!
C-GLOV
http://www.mykitlog.com/Don%20Patrick
Reply With Quote
  #2  
Old 09-29-2011, 10:59 PM
Trevor778 Trevor778 is offline
 
Join Date: Sep 2010
Location: Airdrie AB Canada
Posts: 172
Default
I cant see a problem with it. Although once the pro seal has set I think that the support the heat shrink will provide is insignificant.
__________________
7 empennage done
wings done
fuse done
0-360A4M Fixed pitch sensenich
Finish kit


C-GVRT Reserved
Reply With Quote
Reply

« Previous Thread | Next Thread »


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 06:58 PM.
Contact Us - VAFForums Home - Archive - Privacy Statement - Top

The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.