VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics


Go Back   VAF Forums > Main > RV General Discussion/News
Register FAQ Members List Calendar Today's Posts

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 06-24-2011, 07:57 PM
Nihon_Ni's Avatar
Nihon_Ni Nihon_Ni is offline
 
Join Date: Jun 2011
Location: Fredericksburg, VA
Posts: 312
Default Thinking about RV-7/8/9 (San Diego area)

Hello All!

I am a serviceman stationed in Japan, but will be in the San Diego area this week (6/25 - 7/2). I have been making plans to start building an airplane for years, and I'm looking to a Fall '12 start date after I rotate back to the States. My top contenders are the Sonex/Xenos and the RV-7/8/9.

If anyone in the San Diego area has a RV-7/8/9 in any stage of completion and wouldn't mind spending a little time with me I'd love to pick your brain. I'll be working Mon - Thurs, but will have evenings free and all day on Fri. (Unless I decide to run up to Oregon to visit the factory -- very tempting!)

Thanks,
Rob
Reply With Quote
  #2  
Old 06-24-2011, 08:34 PM
bruceh's Avatar
bruceh bruceh is offline
 
Join Date: Mar 2008
Location: Ramona, CA
Posts: 2,368
Default

I'm building a -9A. Done with the tail, wings and fuselage. Just got my finish kit recently. You are welcome to come up and take a look any evening. I'm about 45 minutes away from downtown SD in Ramona. There a number of flying RV's at Ramona airport.
__________________
Bruce Hill
RV-9A N5771H flown over 800 hours!
http://www.overthehills.com/RV-9A-Project
APRS Tracking for KJ6YRP and New Flying Blog
2020 VAF donator
EAA Tech Counselor, Build assistance - canopy/tanks/fiberglass/electrical/repairs
Reply With Quote
  #3  
Old 06-24-2011, 09:39 PM
roee roee is offline
 
Join Date: Feb 2006
Location: San Diego, CA, U.S.A.
Posts: 770
Default

Rob,

I'm building an RV-7A. Structurally, the airframe is mostly complete. Currently finishing up the landing gear fairings, and getting ready to mount the engine.

I'm in Carmel Mtn Ranch. I think I'm free Mon evening, busy Tue & Wed, and Thu & Fri are a maybe.

roee at kalinskyconsulting dot com
__________________
Roee Kalinsky
San Diego, CA, U.S.A.
RV-7A under construction
www.kalinskyconsulting.com/rvproj/
Reply With Quote
  #4  
Old 06-25-2011, 12:41 AM
Nihon_Ni's Avatar
Nihon_Ni Nihon_Ni is offline
 
Join Date: Jun 2011
Location: Fredericksburg, VA
Posts: 312
Default

Thanks guys! I've replied to each of you by email/PM.
Reply With Quote
  #5  
Old 06-25-2011, 08:33 AM
Mike S's Avatar
Mike S Mike S is online now
Senior Curmudgeon
 
Join Date: Sep 2005
Location: Dayton Airpark, NV A34
Posts: 15,408
Talking Welcome to VAF

Rob, welcome to the best place on the web for things RV.

Good to have you aboard.

Marine------Thanks for your service.
__________________
Mike Starkey
VAF 909

Rv-10, N210LM.

Flying as of 12/4/2010

Phase 1 done, 2/4/2011

Sold after 240+ wonderful hours of flight.

"Flying the airplane is more important than radioing your plight to a person on the ground incapable of understanding or doing anything about it."
Reply With Quote
  #6  
Old 06-27-2011, 11:24 PM
Nihon_Ni's Avatar
Nihon_Ni Nihon_Ni is offline
 
Join Date: Jun 2011
Location: Fredericksburg, VA
Posts: 312
Default

Thanks for all the support guys! Roee was generous enough to let me monopolize some of his time tonight and now my head is spinning with all sorts of possibilities.

I've pretty much ruled out a trip to Oregon on Friday -- I'm all about the adventure, but I don't have a day to spare in case I get stuck there. Roee suggested I post to see if anyone is available to take me for a demo ride either Friday or Saturday. Having never flown either a Sonex or a RV is complicating my decision process. If anyone is planning on flying this week and would like some company let me know. I'm more than willing to chip in to cover flight expenses.

Thanks again,
Rob
Reply With Quote
  #7  
Old 06-28-2011, 07:56 AM
BillC BillC is offline
 
Join Date: Mar 2005
Location: Ramona, Ca
Posts: 259
Default

Rob,

Check your PM's

Bill
__________________
Bill RV-9A Flying
FFI- Flight Lead
N99WC
Ramona, CA (KRNM)
Reply With Quote
  #8  
Old 06-28-2011, 07:04 PM
Nihon_Ni's Avatar
Nihon_Ni Nihon_Ni is offline
 
Join Date: Jun 2011
Location: Fredericksburg, VA
Posts: 312
Default

Thanks Bill!!
Reply With Quote
  #9  
Old 07-02-2011, 09:14 PM
Nihon_Ni's Avatar
Nihon_Ni Nihon_Ni is offline
 
Join Date: Jun 2011
Location: Fredericksburg, VA
Posts: 312
Default

Thank you San Diego area RVators!

Special thanks to Roee, Bruce and Bill who were generous enough to let me have several hours of their time this past week. I can't tell you all how valuable it was to spend time with each of you. My decisions are beginning to narrow, and the future is likely to start with RV...


Rob
Reply With Quote
  #10  
Old 07-03-2011, 12:28 AM
BSwayze's Avatar
BSwayze BSwayze is offline
 
Join Date: Jul 2007
Location: Molalla, Oregon
Posts: 955
Default

Rob, if you do make it here to Oregon to visit the factory, I live less than 1/2 hour away in SE Portland. My empennage, wings, and fuselage are all finished and I'm currently working on the canopy. You're very welcome to come by and check out my project and talk RV's as long as you like. Visiting Van's Aircraft is a wonderful experience. The tour is amazing.
__________________
Bruce Swayze
RV-7A Standard Build
First flight November 3, 2019!
http://www.BrucesRV7A.com
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 12:06 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.