plasma II help

[Jamie Aust]

I have a plasma II now to replace my right mag.
looking at the firing, I can see that the left mag fires to T1,T3,B2,B4 and the right mag fires to B1,B3,T2,T4. ( T=top, B= bottom )

Now, if I was to connect the plamsa II in the right hand mag, the manual seems to indicate to connect to the TOP plugs. ( T,1,2,3,4 )

My question is this, Do I now move the left mag wire from T1 & T3 to the Bottom B1,B3. Doing this will make the left mag fire to only the bottom plugs, and the Plasma fire to only the top plugs ?

I hope this is correct ?

[Kahuna]

Originally Posted by Jamie Aust

I have a plasma II now to replace my right mag.
looking at the firing, I can see that the left mag fires to T1,T3,B2,B4 and the right mag fires to B1,B3,T2,T4. ( T=top, B= bottom )

Now, if I was to connect the plamsa II in the right hand mag, the manual seems to indicate to connect to the TOP plugs. ( T,1,2,3,4 )

My question is this, Do I now move the left mag wire from T1 & T3 to the Bottom B1,B3. Doing this will make the left mag fire to only the bottom plugs, and the Plasma fire to only the top plugs ?

I hope this is correct ?

Yes you have it correct

[Jamie Aust]

Thanks Kahuna !

[gasman]

Jamie, here is an installation manual..... http://www.lightspeedengineering.com...s/Ignition.htm this is good to have....