Possibly Enlarging Main Spar (Gold) Wiring Holes

UnPossible · #1 06-06-2011, 09:12 PM

Hey - one more quick wire run question and I promise I'll stop for awhile.... I am wondering if anyone has asked Vans about drilling up the two pre-drilled wiring holes in the gold main spar. Currently I think they are 5/8"... wondering if I could drill them both up to 3/4"... it would make my wire runs a bit easier to have a bit more diameter to work with.

FYI - I did a search before posting and did not find a clear answer.

Thanks again,
Jason

David_Nelson · #2 06-06-2011, 11:03 PM

Hi Jason,

Not exactly what you asked but maybe close enough:

Date: Wed, 7 Dec 2005 09:07:12 -0800
From: Bruce Reynolds <brucer@vansaircraft.com>
Subject: Re: Fuselage Questions

David,

<snip>

You can add one additional hole on each side of the spar carry
through just above the existing wire run hole.

Bruce Reynolds
brucer@vansaircraft.com