VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

  #1  
Old 04-12-2006, 07:22 AM
Scott Will's Avatar
Scott Will Scott Will is offline
 
Join Date: Jan 2005
Location: ATL
Posts: 734
Default got me a 396, now what do I need

It's here. yeah...happy birthday to me... a new 396.

What cable do I need to wire it into the ships power? I don't want to cut up the cords with the Garmin connector on it to get to the power lines. Is there a wire harness out there with a Garmin connector on one end and nothing on the other?

It's going in an Air Gizmos dock. So I want to tie it into the ship power and audio panel (GMA-340).

Thanks!!
__________________
Scott Will
http://will2fly.com
CFI - CFII - MEI
FLYING RV-7A IO-360 @ KPDK

Reply With Quote
  #2  
Old 04-12-2006, 07:37 AM
aadamson's Avatar
aadamson aadamson is offline
 
Join Date: Dec 2005
Location: Atlanta, GA
Posts: 726
Default Pretty sure

Scott, check on the Garmin site, they should have a cable with that "round garmin" connector and the other end should just have wires hanging out of it.

I think this should do it...

http://shop.garmin.com/accessory.jsp...0%2D10513%2D00
__________________
Alan Adamson
Atlanta, GA
Lancair Legacy FG-6 - N60AL (fixed gear, carbon fiber, IO-550)
Lancair Legacy Builders Forum
Beta Test Blog of Vertical Power install
Reply With Quote
  #3  
Old 04-12-2006, 08:30 AM
dan's Avatar
dan dan is offline
 
Join Date: Mar 2005
Location: ...
Posts: 2,049
Default

Also, don't be confused by the "audio" wiring that is integral to that harness. The audio you want to run into your GMA-340 is from the 1/8" stereo jack on the back of the 396. The audio wiring that's in the harness is for the automotive setup. Just an FYI...
__________________
Dan Checkoway RV-7
Reply With Quote
  #4  
Old 04-12-2006, 09:03 AM
aadamson's Avatar
aadamson aadamson is offline
 
Join Date: Dec 2005
Location: Atlanta, GA
Posts: 726
Default I might be wrong - didn't sleep at holiday inn last night

Quote:
Originally Posted by dan
Also, don't be confused by the "audio" wiring that is integral to that harness. The audio you want to run into your GMA-340 is from the 1/8" stereo jack on the back of the 396. The audio wiring that's in the harness is for the automotive setup. Just an FYI...
Dan,

Isn't the audio coming from the "garmin connector" the "warning audio" (TAWS like for obstruction, terrain, etc and the TIS warnings) and the audio coming from the "1/8 stereo jack" the XM radio audio?

I don't have mine yet, so I might be wrong.
__________________
Alan Adamson
Atlanta, GA
Lancair Legacy FG-6 - N60AL (fixed gear, carbon fiber, IO-550)
Lancair Legacy Builders Forum
Beta Test Blog of Vertical Power install
Reply With Quote
  #5  
Old 04-12-2006, 09:11 AM
dan's Avatar
dan dan is offline
 
Join Date: Mar 2005
Location: ...
Posts: 2,049
Default

Quote:
Originally Posted by aadamson
Isn't the audio coming from the "garmin connector" the "warning audio" (TAWS like for obstruction, terrain, etc and the TIS warnings) and the audio coming from the "1/8 stereo jack" the XM radio audio?
Nope. It's all about the 1/8" jack for aviation mode.
__________________
Dan Checkoway RV-7
Reply With Quote
  #6  
Old 04-12-2006, 09:14 AM
aadamson's Avatar
aadamson aadamson is offline
 
Join Date: Dec 2005
Location: Atlanta, GA
Posts: 726
Default Ah, ok

Quote:
Originally Posted by dan
Nope. It's all about the 1/8" jack for aviation mode.

So, I'll assume that if you are in auto mode, then you get the "directions" in voice via those other pins?

Also, when the "warnings" come thru on the 1/8 jack, are they mixed with the xm audio, or do they internally mute it? Not talking about with an audio panel, just the 1/8 jack audio?
__________________
Alan Adamson
Atlanta, GA
Lancair Legacy FG-6 - N60AL (fixed gear, carbon fiber, IO-550)
Lancair Legacy Builders Forum
Beta Test Blog of Vertical Power install
Reply With Quote
  #7  
Old 04-12-2006, 09:32 AM
rv8ch's Avatar
rv8ch rv8ch is offline
 
Join Date: Feb 2005
Location: LSGY
Posts: 3,173
Default 396 audio

Quote:
Originally Posted by dan
... It's all about the 1/8" jack for aviation mode.
Dan, do you know if it's possible to split out the warnings from the xm radio? I think it's good for the intercom to mute the music when you get activity on the comm, but not the warnings. I downloaded and read the manual, but it's very light on discussion of the audio out. Thanks!
__________________
Mickey Coggins
http://rv8.ch
"Hello, world!"
Reply With Quote
  #8  
Old 04-12-2006, 09:43 AM
dan's Avatar
dan dan is offline
 
Join Date: Mar 2005
Location: ...
Posts: 2,049
Default

Quote:
Originally Posted by rv8ch
Dan, do you know if it's possible to split out the warnings from the xm radio? I think it's good for the intercom to mute the music when you get activity on the comm, but not the warnings. I downloaded and read the manual, but it's very light on discussion of the audio out. Thanks!
Not that I know of, but I'm probably not the best person to ask (I still probably haven't discovered half the features of the 396). Maybe if Matt Burch (RV-7 builder & Garmin dude extraordinaire) is listening he might have some ideas.
__________________
Dan Checkoway RV-7
Reply With Quote
  #9  
Old 04-12-2006, 09:43 AM
aadamson's Avatar
aadamson aadamson is offline
 
Join Date: Dec 2005
Location: Atlanta, GA
Posts: 726
Default Agreed

Quote:
Originally Posted by rv8ch
Dan, do you know if it's possible to split out the warnings from the xm radio? I think it's good for the intercom to mute the music when you get activity on the comm, but not the warnings. I downloaded and read the manual, but it's very light on discussion of the audio out. Thanks!
Mickey, I also agree with you. That is why I had hoped one came from one place and one from the other. Hopefully Dan can educate us
__________________
Alan Adamson
Atlanta, GA
Lancair Legacy FG-6 - N60AL (fixed gear, carbon fiber, IO-550)
Lancair Legacy Builders Forum
Beta Test Blog of Vertical Power install
Reply With Quote
  #10  
Old 04-12-2006, 09:45 AM
dan's Avatar
dan dan is offline
 
Join Date: Mar 2005
Location: ...
Posts: 2,049
Default

Quote:
Originally Posted by aadamson
So, I'll assume that if you are in auto mode, then you get the "directions" in voice via those other pins?

Also, when the "warnings" come thru on the 1/8 jack, are they mixed with the xm audio, or do they internally mute it? Not talking about with an audio panel, just the 1/8 jack audio?
Guys, I mean this in the nicest way, but RTFM. I had the same questions originally and talked to Garmin to find out the details. I gotta run...I could spend all day typing the manual and posting to this forum, but I have an RV-7 full of gas that needs to be flown to Vegas RIGHT NOW...back online from Mandalay Bay later tonight...
__________________
Dan Checkoway RV-7
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 09:10 PM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.