Just did it
I am in the process as well. I really thought it was going to be tough but wasn't bad. The toughest part was removing glue from the where the former interior was glued in place.
1) remove all panels, covers, tip up mechanics etc....
2) Mask everything you don't want painted.
3) Clean everything thoroughly
4) Scotch brite everything to be painted.
5) Clean again
6) Paint.
7) Put everything back together
I found as perfect a paint match as possible for the Classic Aero tan!!!!
__________________
Darwin N. Barrie
Chandler AZ
www.JDair.com
RV-7 N717EE-Flying (Sold)
RV-7 N717AZ Flying, in paint
EMS Bell 407,
Eurocopter 350 A-Star Driver
|