replacing tailwheel fork swivel bush

[Bluebeard]

The bush into which my swivel post fits has become pretty worn and the post is too loose. I have got a replacement bush. So I have to cut out the old bush and press in the replacement, then bore it out (from memory this is from 3/4" id to 7/8" id).

Has anyone else here done this, searching the posts comes up with nothing.

Cheers

[vfrazier]

I think I can help with this. Give me a call. I'll PM you my home phone since the office is closed for the holiday.

Vince

[RV8iator]

I'd be interested to hear the results of this. My tailwheel fork is just starting to get a small amount of play.