VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics


Go Back   VAF Forums > Main > RV General Discussion/News
Register FAQ Members List Calendar Today's Posts

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 12-07-2010, 10:51 AM
Ironflight's Avatar
Ironflight Ironflight is offline
VAF Moderator / Line Boy
 
Join Date: Jan 2005
Location: Dayton, NV
Posts: 12,247
Default You Know You?re Committed?.

It?s fun to see how different folks react to different points in their RV projects. Many feel like they have really jumped in with everything they have when they order a tool kit. For others, it?s the arrival of their tail kit. For many, that big check that goes with the wings or fuselage is the point where they stop and say to themselves ?wow ? I?m really in it now!?

For me, there is no doubt about this point ? it?s the engine. Today, we paid for our new Mattituck TMXIO-320 (Red-Gold package, P-Mags, etc) which ran for the first time last week, and is now crated for shipment to Texas. It?s a big chunk of change, a new engine?.bigger than any single kit you?re likely to buy for the rest of the airplane (unless you get all the avionics at once). The fact that I try to always buy ahead of need, so as not to slow down the building process, means that I frequently have big, expensive items sitting on the shelf, ready to install, taunting me to get the airplane done. And nothing taunts louder than a $25,000 jewel of an engine sitting on a pallet in the corner. I admit that once that is sitting there, I feel a certain amount of pressure to ?pick up the pace?, since that ?money? isn?t giving me any return on investment until it flies, and the real fun begins!

So sometime next week, we?ll get a call from the trucking terminal to come pick up the crate, and we?ll have a bit of an early Christmas as we open the box to ?Ooh and Ahh? over the jewel from Long Island. We?ll say thanks to Mahlon and all the folks in the little toy factory up north. And maybe we?ll pick up a few tools and get going in prep for engine mounting sometime this winter?Who knows, if we are REALLY good, Santa might even have a prop on his sleigh by the end of the year!

Then we?ll REALLY be committed?

Paul
__________________
Paul F. Dye
Editor at Large - KITPLANES Magazine
RV-8 - N188PD - "Valkyrie"
RV-6 (By Marriage) - N164MS - "Mikey"
RV-3B - N13PL - "Tsamsiyu"
A&P, EAA Tech Counselor/Flight Advisor
Dayton Valley Airpark (A34)
http://Ironflight.com
Reply With Quote
  #2  
Old 12-07-2010, 11:17 AM
michael_c michael_c is offline
 
Join Date: Feb 2010
Location: Chicago, il
Posts: 27
Default My clear point of commitment

Started back in August. After all of the convenience of building at my house, I got to thinking about how much time I'll have to spend going to and from whatever airport I finally park my 8 at when I'm done with the build. (I'm in Chicago, 5 mins from the loop, so everything is at least a 30 minute drive without traffic.)

So I started looking around for airpark lots to build a house on and make using the plane as convenient as building it. After reading a post here, I found a realtor out in Oregon who specializes in airport properties and started talking to her about what I wanted. Flew out to Oregon in September to look at some airparks, made an offer and closed November 1st. Along the way I got upsold just a bit and bought more than just the lot I was originally thinking about.. And now I own Valley View Airport (5S9) in Estacada, OR. 3800' paved runway, 20 T hangars with room for more (and fuel) and an attached airpark with around 20 families already out there, plus a nice wooded corner for my house to be.

Now all these parts need to continue assembling into a finished plane so I can start work on the house and move out there in the not too distant future. If that's not a way to guarantee I won't walk away from the build, I'm not sure what else could do it.

Last edited by michael_c : 12-07-2010 at 11:24 AM.
Reply With Quote
  #3  
Old 12-07-2010, 11:18 AM
bruceh's Avatar
bruceh bruceh is offline
 
Join Date: Mar 2008
Location: Ramona, CA
Posts: 2,367
Default

Paul,
Very true. I'm at that point where there is only a few more things left on the fuselage kit, and I want to get the finish kit ordered. Before I can do that I need to determine what type prop, engine, fuel injection, pumps, etc. are needed in order to get the right engine mount, cowling, etc.
Too many decisions! And they are all getting expensive...
Hopefully I can figure it all out before the yearly bump in kit prices.
__________________
Bruce Hill
RV-9A N5771H flown over 800 hours!
http://www.overthehills.com/RV-9A-Project
APRS Tracking for KJ6YRP and New Flying Blog
2020 VAF donator
EAA Tech Counselor, Build assistance - canopy/tanks/fiberglass/electrical/repairs
Reply With Quote
  #4  
Old 12-07-2010, 11:42 AM
Brantel's Avatar
Brantel Brantel is offline
 
Join Date: Mar 2006
Location: Newport, TN
Posts: 7,496
Default

I felt committed when I started feeling like the risk of not having insurance on the pile of parts I had in my garage was too high!!!
__________________
Brantel (Brian Chesteen),
Check out my RV-10 builder's BLOG
RV-10, #41942, N?????, Project Sold
---------------------------------------------------------------------
RV-7/TU, #72823, N159SB
Lyc. O-360 carbed, HARTZELL BA CS Prop, Dual P-MAGs, Dual Garmin G3X Touch
Track N159SB (KK4LIF)
Like EAA Chapter 1494 on Facebook
Reply With Quote
  #5  
Old 12-07-2010, 12:17 PM
ArVeeNiner's Avatar
ArVeeNiner ArVeeNiner is offline
 
Join Date: Jun 2006
Location: San Jose, CA
Posts: 1,125
Default What the heck am I thinking? Building a plane in my garage?????? Am I losing it?

It took me a long time to get past the "what the heck are you thinking?" phase. Up until the wings were almost done, I felt that this was just a fact finding excercise. I didn't feel that I was building "my" airplane for this entire time. I still had my Aeronca Sedan which flew just fine and was tons of fun so I reasoned that I could always sell what I had and keep flying low and slow.

At some point during the wing build it all clicked and I was convinced that not only was I building an airplane, it was MY airplane and that I was going to complete it. By the time I sold the Aeronca, I was into the RV with both feet and didn't look back.

My Aeronca has been gone for 4 years now (yea, I'm going slow) but I'm very close to completing the RV and I have no regrets at all. I've got to tell you though, I'm about ready for it to be done and flying.
__________________
Kelly Johnson
San Jose, CA
RV-9A

Pink slip issued: 5/7/12

First flight: 5/28/12, Memorial Day.

Phase I Complete: 8/18/12!

2020 donation: complete
Reply With Quote
  #6  
Old 12-07-2010, 02:26 PM
eatenbyagrue eatenbyagrue is offline
 
Join Date: Oct 2009
Location: Portland, OR
Posts: 65
Default Big step

Congrats on the new engine.... coincidentally, I also bought a new engine today. Just got off the phone with Eric at Western Skyways not an hour ago.

Definitely puts the project in a more serious light!
__________________
Joshua Siler
RV-7A QB
Reply With Quote
  #7  
Old 12-07-2010, 02:39 PM
dicel87's Avatar
dicel87 dicel87 is offline
 
Join Date: Jan 2005
Location: Kansas City, MO
Posts: 182
Default

Quote:
Originally Posted by michael_c View Post
So I started looking around for airpark lots to build a house on and... now I own Valley View Airport (5S9) in Estacada, OR.
That would not have gone over well in my house at all.

"We own a what? What part of LOT for a house did you NOT understand?"

Congrats on the purchase!
__________________
Scott

Happy to be a 2012 and 2013 VAF supporter
Reply With Quote
  #8  
Old 12-07-2010, 03:39 PM
Chino Tom's Avatar
Chino Tom Chino Tom is offline
 
Join Date: Jun 2005
Location: Chino, CA
Posts: 738
Default

Quote:
Originally Posted by Ironflight View Post
For me, there is no doubt about this point ? it?s the engine. Today, we paid for our new Mattituck TMXIO-320
That was it for me too (twice)...... Santa was reallllly nice to you!
__________________
Tom Prokop
Chino, CA
RV-8A,180/CS/Carb, AFS 4500 EFIS/EMS
RV-6, sold, 820 hrs of fun.
Reply With Quote
  #9  
Old 12-07-2010, 04:21 PM
scard's Avatar
scard scard is offline
 
Join Date: Jun 2005
Location: Cedar Park, TX
Posts: 3,152
Default

...when the wife says we have to buy a new house to better accomodate building airplanes (plural). Oh, there may have been some kind of grumbling about wings in the living room for over a year too. Now I'm committed.
__________________
Scott Card
CQ Headset by Card Machine Works
CMW E-Lift
RV-9A N4822C flying 2200+hrs. / Cedar Park, TX
RV8 Building - fuselage / showplanes canopy (Done!)
Reply With Quote
  #10  
Old 12-07-2010, 04:43 PM
Phil's Avatar
Phil Phil is offline
 
Join Date: Nov 2006
Location: Waco, Texas
Posts: 1,658
Default

Hey Paul,

For me, that's always "the last check".

Tools? - check. I thought I was in.
Tail kit? - check. I thought I was in.
Fuselage? - check. I thought I was in.
Wings? - check. I thought I was in.
Finish Kit? - check. I think I'm in....

It reminds me of boiling a frog. If you put'em in a pot of boiling water, they'll jump out. But if you put them in cool water and then crank up the heat, they're committed without even realizing it.

It's escalating levels of commitment in our house.

I'm getting ready to write the G3X check in the next 2 weeks and that'll be a whole other level of commitment.

The good news is that we're paying for the entire project in cash we'll take how ever long it takes. We like being committed to the project; not being committed to "the man"!

Phil

By the way, let me know if you need help picking it up. I live up by there and we can load it into my F-150.... Just let me know and I'll help.
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 10:49 PM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.