Quote:
Originally Posted by gimp2x
The bar stock is AB4-187X1 1/4X12, but I'm trying to figure out if this is 3/16" thick, I messed my piece up and I ordered a 1/4" thick piece from mcmaster-carr- but it got here and is thicker, so now I'm stuck and trying to figure out my next step
help!
|
.187 is 3/16"
If it were 1/4", it would be AB4-25X1 1/4X12.
The "AB" means it is aluminum bar stock. "187" means it is 3/16" thick. "1 1/4" means it is 1 1/4" wide. "12" means it is 12" long.
__________________
Mel Asberry, DAR since the last century.
EAA Flight Advisor/Tech Counselor, Friend of the RV-1
Recipient of Tony Bingelis Award and Wright Brothers Master Pilot Award
USAF Vet, High School E-LSA Project Mentor.
RV-6 Flying since 1993 (sold)
<rvmel(at)icloud.com>
Last edited by Mel : 08-24-2010 at 09:03 PM.
|
Thickness of W-426 Spacers?
Linear Mode
