|
-
POSTING RULES

-
Donate yearly (please).
-
Advertise in here!
-
Today's Posts
|
Insert Pics
|

04-16-2010, 07:43 AM
|
|
|
|
Join Date: Jun 2006
Location: Ottawa, Ontario, Canada
Posts: 2,116
|
|
Canadians - EMS temp units?
Question for Canadians... for your EMS temps (oil temp, CHT, EGT), do you use degrees F or degrees C ?
__________________
Phil
RV9A (SB)
Flying since July 2010!
Ottawa, Canada
|

04-16-2010, 07:57 AM
|
|
|
|
Join Date: Jan 2005
Location: Ontario, Canada
Posts: 1,544
|
|
Degrees F, with the exception of OAT
__________________
Tom Martin RV1 pilot 4.6hours!
CPL & IFR rated
EVO F1 Rocket 1000 hours,
2010 SARL Rocket 100 race, average speed of 238.6 knots/274.6mph
RV4, RV7, RV10, two HRIIs and five F1 Rockets
RV14 Tail dragger
Fairlea Field
St.Thomas, Ontario Canada, CYQS
fairleafield@gmail.com
|

04-16-2010, 08:00 AM
|
|
|
|
Join Date: Jun 2006
Location: Ottawa, Ontario, Canada
Posts: 2,116
|
|
Thanks Tom. I forgot to ask you when we spoke on the phone - are you the owner of the Rocket that has that grey-cammoflauge paint scheme with the CF Roundel's on it? I saw pics of it a while back, and was just drooling... looks so cool.
__________________
Phil
RV9A (SB)
Flying since July 2010!
Ottawa, Canada
|

04-16-2010, 09:59 AM
|
|
|
|
Join Date: Jan 2005
Location: Ontario, Canada
Posts: 1,544
|
|
Yes, that would be mine. I am awaiting the return of my ECI cylinders. They have been shipped and I expect them late next week.
__________________
Tom Martin RV1 pilot 4.6hours!
CPL & IFR rated
EVO F1 Rocket 1000 hours,
2010 SARL Rocket 100 race, average speed of 238.6 knots/274.6mph
RV4, RV7, RV10, two HRIIs and five F1 Rockets
RV14 Tail dragger
Fairlea Field
St.Thomas, Ontario Canada, CYQS
fairleafield@gmail.com
|

04-16-2010, 10:05 AM
|
|
|
|
Join Date: Jun 2006
Location: Ottawa, Ontario, Canada
Posts: 2,116
|
|
is that scheme actually historical? I think I recall the roundels are the modern type - but the only CF fighters with a cammo scheme that I know of were the CF-104's used in Germany.
Maybe if i make it down to your area in June I can come and see your beauty up close.
__________________
Phil
RV9A (SB)
Flying since July 2010!
Ottawa, Canada
|

04-16-2010, 10:45 AM
|
|
|
|
Join Date: Apr 2006
Location: Vancouver island, BC Canada
Posts: 385
|
|
I agree with Tom. OAT in C, the rest in steam age F.
For us in Canada, all the available info is so US dominated that it would be confusing not to use Fahrenheit. Think about manufacturers data, trouble shooting, posts on VAF etc. It could be a lot of work.
I strongly prefer Celsius but I'm going F for my EMS
Looking for your new paint job when you post it.
__________________
Jim Green
RV7 tip up
IO360 Whirlwind 200RV
|

04-16-2010, 11:53 AM
|
|
|
|
Join Date: Jan 2005
Location: Ontario, Canada
Posts: 1,544
|
|
Phil
There is nothing historical about my paint scheme, hysterical perhaps! This is the fourth rocket that I have personally owned and with it I wanted to experiment with a lot of different modifications. A primer paint scheme works well as I can make a change, shoot a bit of primer and I am back in the air. I have had painted planes in the past and the problem with paint is that you are reluctant to make any changes. Any ways, based on four years of SARL races I have added 20 mph to this airplane and it is currently the fastest rocket based on race results. The primer is starting to look a bit ragged around the edges but until I stop racing, grey, it will remain!
Keep August 21st open as I am hosting the first SARL event in Canada; ?The Great Canadian Air Rally?. I am hoping to get quite a few Ontario planes to participate; it will be a flying weekend with a barn dance on the Saturday night.
__________________
Tom Martin RV1 pilot 4.6hours!
CPL & IFR rated
EVO F1 Rocket 1000 hours,
2010 SARL Rocket 100 race, average speed of 238.6 knots/274.6mph
RV4, RV7, RV10, two HRIIs and five F1 Rockets
RV14 Tail dragger
Fairlea Field
St.Thomas, Ontario Canada, CYQS
fairleafield@gmail.com
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 02:58 AM.
|