Pictures of routing spark plug wires?

[vbpiper]

I have been scratching my head about where to run the spark plug wires from the mags to the sides of the engine. The engine is a Lycoming XO-360 from Van's. As shipped, the wires are tied together under the oil filter. A diagram that came with the engine is less than clear. I will use the Slick cushioned clamps attached to the valve covers to support the lower wires near the cylinders, but would REALLY appreciate a picture or two of how to rout them from the mags. I'm hoping to keep them out from under the oil filter just to keep them clean during oil changes.
Thanks!