VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

  #1  
Old 11-22-2009, 04:37 AM
Bernie RV7 Bernie RV7 is offline
 
Join Date: Mar 2007
Location: Melbourne, Australia
Posts: 41
Default Fwd wing to fuselage bolt lockwire

Where have you attached your lockwire at the forward wing attach brackets and the bolt ?
__________________
Bernie Flying RV6
Melbourne Australia
Reply With Quote
  #2  
Old 11-22-2009, 06:15 AM
flion's Avatar
flion flion is offline
 
Join Date: Dec 2007
Location: Flagstaff, AZ
Posts: 2,647
Default

If you're talking about the fuel tank attach brackets, you can drill a 1/16" hole in the T405 bracket below the bolt. It was in the plans for the -6/6A; I don't see it in the plans for the 7/7A but the material and attach method are the same so I don't think a small hole near the edge of the bracket will cause you a problem.
__________________
Patrick Kelley - Flagstaff, AZ
RV-6A N156PK - Flying too much to paint
RV-10 14MX(reserved) - Fuselage on gear
http://www.mykitlog.com/flion/
EAA Technical Counselor #5357
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 12:35 PM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.