Long bushings in prop flange

bobby · #1 08-01-2009, 10:08 AM

I'm considering a lyc O-360-A4A for my RV-8 and am wondering if the long prop flange bushings will present a problem with the installation. I'm planning a Catto 3-blade prop.

Thanks,

Kahuna · #2 08-01-2009, 11:04 AM

Most fixed blade installations are counter bored already for the prop bushings.
The A4A model has a .38" flange and bushings 74249-S and 74248-S.
Looking fwd at the flange with #1tdc at the 12 oclock position, going clockwise, the first 5 bushings are 74249-S and the last is 74248-S. Looking at the table below, their lengths are the same. Give catto a call and give em these dimensions.

bobby · #3 08-01-2009, 08:38 PM

thanks for the info.