The change on 31-02 calls for modifying a 3/4dia grommet with a 1/4 in hole. The grommet shown on 31-03 is a 1" dia with a 3/8 hole. So I suspect the modified grommet (3/4 with a 1/2 in hole ) goes elsewhere, but dwg does not specify location. (step 1 on 31-03) There are two as yet unused holes. One at 3/4 dia and one at 1/2 dia. Is the 3/4 hole the likely location?????
Dick Seiders
mystery grommet
Linear Mode
